NEW GUY ON THE BLOCK
 

AFTER SEVERAL YEARS OF SEARCHING I PURCHASED A 1975 20FT WHAT I BELIEVE IS A MASTER ANGLER HULL #SECF00150875 . I plan to do a complete restoration. I used the boat all summer and it appears to be in good shape. How can I tell what model it is and are there any major things I should look for during redo. Any help as to what the boat looked like new would be great,ie interior trim,decals. I would appreciate any and all help--thanks

Re: NEW GUY ON THE BLOCK
 

Striper - welcome to ClassicSeacraft - show us some pics of your 75 MA.

Re: NEW GUY ON THE BLOCK
 

[ January 09, 2004, 10:18 PM: Message edited by: John R ]

Re: NEW GUY ON THE BLOCK
 

Striper,

Welcome to the site and congratulations on your '75 20'. Spend some time and search though this site. You'll find pretty much everything you'll want to know on the various steps of a complete restoration of various models of SeaCrafts.

Personally, I am just finishing a complete restoration of a 23 CC, so I know what you're in for. I think the key areas will be the transom, deck, fuel tank and paint/gel coat. It's automatic that you should fully disassemble the boat to the keel, including every fastener, Find and repair rotted wood and damaged glass. I think in retrospect, if the floor is soft, removing it entirely will give you access to the stringer system and replace the floor entirely.

As many here will advise you, each task has an associated quantity of beverage required to complete it. At the end of the project, you should have enough money in returnables to pay for your new electronics.

The learnig curve is the fun part. Enjoy...

[ January 09, 2004, 11:31 PM: Message edited by: Otto Cuyler ]