Classic SeaCraft Community - Captn Brad et al

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)

- - Captn Brad et al (http://www.classicseacraft.com/community/showthread.php?t=14037)

catman115

03-01-2004 11:39 AM

Captn Brad et al

Captn Brad, I was looking at the pix of your boat in the boatzone and noticed in one of the ass end pix your transducer is mounted on a raised panel. T he panel appears to be screwed in and sealed. Whats the panel ? and why do that ??

TUGBOAT

03-01-2004 11:55 AM

Re: Captn Brad et al

I used a white polycast acrylic. I used 4 screws & 5200 to seal.Everything screws to this plate not thru it. I made it large enough to mount other Toy'z. I can move the transducer around to adjust also.(Worked 1st time where its at) I just didn't want to put a bunch of holes in the New Transom.This way everything will be located in 1 place.
So far it has worked out.
Scream'n Reels'
There may be more photo's here.
83' MA Seacraft

All times are GMT -4. The time now is 08:44 PM.