![]() |
merc problem
Hey everyone,
My boat is basically completed finally. Now that I have everything togeather, I was able to crank the motor(150 efi merc) today. It cranks but never fires. I went through every thing but I just cant figure what the problem is. I wd-40 the whole thing, cleaned the plugs, and made sure it was getting gas. What else should I check for? Any thoughts on what the problem might be? Thanks, George ps this is the first time since this summer that the motor has been cranked. [img]/images/graemlins/confused.gif[/img] |
Re: merc problem
Congrats on finishing your boat George!!
------------------------------------------------- For the engine problem . . . If you're getting fuel to the cylinders and the engine won't fire you're probably not getting a spark, b/c some aspect of your ignition system isn't working properly. (Maybe check your kill switch first) then check to see if you're getting spark on each of the plugs. |
Re: merc problem
Great to hear your boat is nearly finished!
Double check your kill switch connections. I have seen that problem pop up more than once. |
Re: merc problem
Thanks guys,
You are probably right, I totally forgot about the kill switch connections. Wednesday when I get some time off of school I will look it over. I will post pictures soon also. -George |
All times are GMT -4. The time now is 03:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft