Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   For Sale (http://www.classicseacraft.com/community/forumdisplay.php?f=7)
-   -   95' 115 Ocean Pro for parts (http://www.classicseacraft.com/community/showthread.php?t=15117)

sailcat 02-01-2005 07:21 PM

95' 115 Ocean Pro for parts
 
Everything on this engine works well. "EXCEPT", It has 2 cylinders with bad compression. It ran when I took it off the boat but not trustworthy enough.. Great parts motor. New pump last year for the trim/tilt. Lower unit in great shape. S/S prop.
I was told by a dealer that they had a recall on the cylinders a couple of years ago. To bad they didn't tell me. If anyone is looking for parts or all pls e-mail me.
sailcat121@adelphia.net

Bigshrimpin 02-02-2005 10:44 AM

Re: 95' 115 Ocean Pro for parts
 
bobber - are the "bad cylinders" on the same side of the block? Could be as simple as a blown head gasket? you might wanna go for a second opinion.

sailcat 02-02-2005 11:29 AM

Re: 95' 115 Ocean Pro for parts
 
No sir, It's the bottom 2. The top cylinders are at 100psi, but the bottom 2 are at around 50psi. Plus there was salt burn on the plugs.. Like I said, the motor runs, it just has a hard time at idle. Not a favorable situation when out on the 6 mile reef. But thanks for the feedback.

PipeDreamsMarine 02-02-2005 01:25 PM

Re: 95' 115 Ocean Pro for parts
 
20" or 25" shaft?... price?.. email me the price if you want.

sailcat 02-03-2005 07:02 AM

Re: 95' 115 Ocean Pro for parts
 
It's a 20" shaft.

PipeDreamsMarine 02-03-2005 08:46 AM

Re: 95' 115 Ocean Pro for parts
 
20" will work for me... price?


All times are GMT -4. The time now is 12:21 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft