Non Skid Surface
 

I have recently purchased a 23' Center Console and will be doing some deck work.
Can anyone tell me how to go about matching the non skid surface and if there is someone who supplies the required products.
Thanks

Re: Non Skid Surface
 

SeaCraft deck design is pretty unique and I don’t know any patterns that you could purchase that would match the design. Most guys have had to re do the entire deck thus nothing left to have to follow.
FellowShip [img]/images/graemlins/cool.gif[/img]

Re: Non Skid Surface
 

The decks on either side of my console were replaced from the stern to the raised deck in the bow. The non skid was matched exactly as original,so I know it can be done. Provided we're talking about an early model. The newer ones are a more difficult checked pattern. Mine is a'72 CC.-PF

Re: Non Skid Surface
 

CAPT JOE,

THERE IS PRODUCT MADE BY GIBCO-FLEX (817)236-5020 WHICH
MAY FULFILL YOUR NEEDS. THE PROBLEM IS IT IS VERY EXPENSIVE
AROUND $30 PER SQ.FOOT. ALSO, THEY DO NOT SELL TO THE
CONSUMER, BUT THEY WILL BE ABLE TO GIVE YOU A RETAILER IN YOUR AREA.