Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   Salvagefirst's 23 (http://www.classicseacraft.com/community/showthread.php?t=15274)

Finster 03-26-2005 10:48 PM

Salvagefirst's 23
 
This is cool. These were sent to me by Salvagefirst.
Looks like ya took the bull by the horns there Les.

http://img.photobucket.com/albums/v4...l/DSC00105.jpg

http://img.photobucket.com/albums/v4...l/DSC00104.jpg

http://img.photobucket.com/albums/v4...l/DSC00111.jpg

http://img.photobucket.com/albums/v4...l/DSC00109.jpg

strick 03-27-2005 01:04 AM

Re: Salvagefirst's 23
 
I'd like to know how he got the deck off in one piece. Mine was cemented in in there and I dont think I could have got it off without damaging it. Good work! thats the way to take a boat apart. [img]/images/graemlins/cool.gif[/img]

Strick

salvagefirst 03-27-2005 08:23 AM

Re: Salvagefirst's 23
 
mine is a 1989, and there wasnt mutch still holdingthe liner in. Striper fishing out of oregon inlet in jan every time she come off a wave the liner would shake back and forth, when i pulled the cap all the screws were gone, the floor just flopped up and down. I thought the inner liner would have been bonded together at the top where the scews went. Has anybody else run into this or is this just (Tracker Marine) workmanship?

Ed 03-27-2005 08:49 AM

Re: Salvagefirst's 23
 
Nicely done, Salvagefirst. The best part is that if you have to recore any of the cap or deck sections due to water intrusion you can do it front the underside and not have to worry about fairing and doing finish work on the topsides.

Keep the pictures coming.

Ed

Capt Chuck 03-27-2005 09:18 AM

Re: Salvagefirst's 23
 
Quote:

(Tracker Marine) workmanship?

Yeap, that be the problem [img]/images/graemlins/frown.gif[/img]

Ntrain2k 03-27-2005 11:07 AM

Re: Salvagefirst's 23
 
Quote:

mine is a 1989, and there wasnt mutch still holdingthe liner in. Striper fishing out of oregon inlet in jan every time she come off a wave the liner would shake back and forth, when i pulled the cap all the screws were gone, the floor just flopped up and down. I thought the inner liner would have been bonded together at the top where the scews went. Has anybody else run into this or is this just (Tracker Marine) workmanship?

I don't know about then, but now the liner is bonded as well as screwed.

Mark 03-27-2005 05:13 PM

Re: Salvagefirst's 23
 
I think you are lucky the liner popped out so easily, regardless of reason. It allows you to really rebuild it from the groud up - something far more in depth than the majority of the rebuilds we see.

thedink9 03-27-2005 08:06 PM

Re: Salvagefirst's 23
 
These have to be some of the finest "how to" pictures ever.
I agree with Ed, turn everything over, cut out the old wood, replace with something hi tech, and glass back in place. I bet it will be better than new. Nice work Savage! Dink

SeaMaster 03-27-2005 08:06 PM

Re: Salvagefirst's 23
 
Thats rebuilding a boat if I ever seen one! [img]/images/graemlins/grin.gif[/img]

Finster 03-27-2005 10:43 PM

Re: Salvagefirst's 23
 
One more for reference.

http://img.photobucket.com/albums/v4...l/DSC00110.jpg


All times are GMT -4. The time now is 10:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft