![]() |
Big Verado on the way
Kind of an interesting thread going on over at SAF.
http://forums.screamandfly.com/forum...ad.php?t=79802 I'd be into that.... |
Re: Big Verado on the way
I know of a 38 Fountain that is currently, or has just left the Mercury racing shop to have it's triple Verado's punched to up to 400HP a piece. This boat will be run on the fishing circuit and the goal is to see how long the tweaked motors will hold up. From what I hear, they are doing this with a few boats at different horsepower to see where the reliability horsepower level is. I would say by next year we will see a bigger mass produced Verado after testing is done at a higher level.
|
Re: Big Verado on the way
I heard the 400hp years ago. [Before the 1st motor was released]I have a buddy that his cousion is a Merc Dealer. Merc has already done it in their testing.
The word was 400hp and 9000rpm and they couldn't blow it up. |
Re: Big Verado on the way
ProLine boats tested a pair of Verado's rated at 350hp on a 34' sportfisherman concept hull with an 12' beam weighing almost 14K lbs. They claimed the two engines pushed that hull to "nearly" 40 mph. Same hull originally equipped with twin BB Chevy IB's rated at 420 hp only did 35 mph. The t/225 Johnson 2 strokes got a speed of 32 mph. I hear they're going to production with this hull in a twin O/B and twin diesel sterndrive config.
|
Re: Big Verado on the way
Quote:
|
Re: Big Verado on the way
I must be getting OLD.
FellowShip [img]/images/graemlins/crazy.gif[/img] |
Re: Big Verado on the way
That's the boat, the "Turn and Burn" and I would say the name is fitting. I saw 68 on the GPS with the 275 Verados's but that was with a full off-shore tournament load, full fuel etc...It will turn over 70mph now with a light load, so I would say low 80's with upgraded motors would be no problem.
|
Re: Big Verado on the way
I'm with you Fellowship. They would have to strap me in to go that fast on the water. [img]/images/graemlins/shocked.gif[/img]
|
Re: Big Verado on the way
my 250 should last forever if the high HP motors are even being considered for a production setup.
Anyone seen a 400 HP E-Tec yet.......... Donnie |
All times are GMT -4. The time now is 10:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft