Bow rail parts for a 20ft centerconsole?
 

To Seacraft nation where can I get the high bow rail style parts?The chrome has worn off on all the elbows and tees.My seacraft is the same as the red one on the front of the web site.
Mike

Re: Bow rail parts for a 20ft centerconsole?
 

CMI duplicates all Boston Whaler railings and fittings with stainless. I'm sure if you ship your stuff to them, they will duplicate it. Fred is a very nice guy and is located in Hingham, Mass. Good luck. zot.

Re: Bow rail parts for a 20ft centerconsole?
 

Thanks for the tip I live about a half hour from Hingham so I could bring the parts to him.

Re: Bow rail parts for a 20ft centerconsole?
 

Mike, any luck with CMI? Spoken to Fred yet? Interested to see what he can do for SeaCraft refinishing/duplicating. Thanks, Mike.

Re: Bow rail parts for a 20ft centerconsole?
 

Hi Mike, I put a call into CMI MARINE WELDING AND REFABRICATING.As soon as I hear back I will update the site.
The number to CMI is 781-740-1260 for anyone interested.

Mike

Re: Bow rail parts for a 20ft centerconsole?
 

Mike I talked to Fred last Saturday and as you said he"s seems to be a nice guy.I asked him about the connecting parts for the bow rail and he thought about 12 dollars a fitting and that he was sure they were a stock item.He is located in the Quincy Shipyard.The pieces would be stainless.
Thanks again Mike

Re: Bow rail parts for a 20ft centerconsole?
 

I just got a quote to replace my low profile grab rail that goes around the whole front of my 23 CC with aluminum. I got a quote for $975.00 to just do the bow rail. I thought that was pretty high and because the guy is going to do some repair work on my T-Top he suggested since the rail really isn’t damaged just old looking that I could just have it Powder Coated and put back onto the boat even though the rail is approx 30 years old.

Question: has anyone powder coated their rails like this and if so how did they come out???

FellowShip [img]/images/graemlins/cool.gif[/img]

Re: Bow rail parts for a 20ft centerconsole?
 

Actually, he's a few miles down the road in the Hingham shipyard where Hewitt's Cove Marina is.

Re: Bow rail parts for a 20ft centerconsole?
 

Fellowship,
I had my handrail and leaning post powder coated in a metalic silver with a gloss clear coat. The leaning post came out great, the handrail so so. They could have done a better job on it. If you know someone who does it well, I would have it done. For both pieces and some other things it cost me $500, which I thought was a little high. You can probably get a better price.-PF

Re: Bow rail parts for a 20ft centerconsole?
 

Thanks PF for the info. When I got the quote for the bow rail at close to a grand I thought that was pritty high. I really don't mind spending $$ on the Boat but that seems High to me.
FellowShip [img]/images/graemlins/wink.gif[/img]