Trailer Choice?
 

I have a 1986 20' center console SeaCraft that has been on a roller trailer since I bought it about five years ago. As I approach the time to either refurbish or replace the trailer I am curious about bunk trailers. I trailer the boat about two miles every time I launch and the ramp is a beauty. What are the pro's and cons of thetwo trailer types?

Re: Trailer Choice?
 

Out on the west coast very few have such a short trip. Because I want to trailer my boat the thousand miles to Cabo, I went with the ABT trailer from SO Cal. I think it's the only Aluminum trailer made out west and it's a tank. Much heavier then a Florida model. It has bunks because I think it's easier on the baot for long trips and won't leave rolls in the hull after time. Although I have my doubts that a Seacraft would do that. My brother in law's Bayliner did.
I would still recomend bunks and when I was in FL that's when I became sold on the idea of this type trailer.
I almost drove to FL to get one before i found ABTrailers on line. Also I bought my trailer for a larger size for the future bracket. I wiegh my tounge be for every tow to check loading. Big downhill from the desert a 4,000 ft decline in 15 miles. Since the boat dosn't have the bracket I checked placement on the trailer for safty.
Again not a problem for you guys with the two mile tows.
I also have nasty dirt roads just to get to the freeway and killer roads in Baja. Even carry complete spindles and brakes.Mexico has potholes that could almost hide a VW.

Re: Trailer Choice?
 

I have owned both roller and bunk trailers both galvanized and aluminum I trailer my boat about 40 + times a year from 10 to 25 miles and at least one trip 100 miles one way. Anyway for me aluminum trailers with bunks and stainless steel Kodiak surge disk brake is the only way to go. On your 20’ boat you might not need the breaks but if you decide on brakes JUST go with stainless steel disks. There are many good trailer companies now a days but I went with Loadmaster out of Tampa Fl.
FellowShip [img]/images/graemlins/wink.gif[/img]

Re: Trailer Choice?
 

If I had bought a trailer in Florida, loadmaster was my choice. They make a great product and the price is good.
I like to look at how things are made and they make a great product.
Too bad for me no Hermco or Loadmaster out here.

Re: Trailer Choice?
 

Love My Roll's Trailer , Bunk.Torsion bar axle with SS Disc. ALL made at Dan's shop.
Rolls Axle Trailers -- Call "DAN" at 1-888-rolls52 or check His site out

Roll's Axle Trailers (site)

Scream'n Reels'
Tug [img]/images/graemlins/cool.gif[/img]

Re: Trailer Choice?
 

We love our stainless steel bunker Loadmaster trailer. And we love Hermco! [img]/images/graemlins/tongue.gif[/img]

Re: Trailer Choice?
 

Another vote for Loadmaster with stainless disc brakes. Mine has bunks but I hear those aren't too popular up North.

Re: Trailer Choice?
 

I love your boat! I keep looking at the gallery and think...If I did that...I would really screw up my boat. I don't have the patience to do that right. I have the tools and some of the skills, but that is profesional. If I lived in Florida I'd be in line.
Love the offset door.would you hurt any feelings by saying the price for a job like that?

Re: Trailer Choice?
 

HatTrick,
Being south of the Cape with less tide change than up here, I'd go bunk, especially if you plan on using the same ramp all the time and you know what to expect. You'll save some $$ too over a comparable roller trailer.

Re: Trailer Choice?
 

I just my 76 23 cc Sea Craft I bought a FLOAT-ON.Perfect fit