Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   Dimensions of Dry Storage Hatch (http://www.classicseacraft.com/community/showthread.php?t=16569)

peterb 04-10-2006 09:48 PM

Dimensions of Dry Storage Hatch
 
I am going to Florida later this week, and I left my boat down at the shore. I forgot to mention the length and width of the hatch to the dry storage box on my 1978 23 SF SeaCraft.

Does anyone know the size? i am asking becuae I plan to stop by Marine Connection Liquidators.

Any input would be appreciated.

Thanks,

Peter

Capt Chuck 04-10-2006 10:36 PM

Re: Dimensions of Dry Storage Hatch
 
What hatch are you referring too Peter? I can measure mine for you. :D

peterb 04-11-2006 09:20 AM

Re: Dimensions of Dry Storage Hatch
 
Capt. Chuck,

You are the best. The hatch right in front of the console (not the one up on the platform). It's the one with two hatch covers and the drain in the bottom.

Thanks,

Peter

Capt Chuck 04-11-2006 09:41 AM

Re: Dimensions of Dry Storage Hatch
 
Ok, the floor hold in front of the console. Mine only has 1 hatch lid.

fore to aft = 37 3/4"
port to strb = 30 3/8"
center depth = 18"

FELLOW-SHIP 04-11-2006 09:50 AM

Re: Dimensions of Dry Storage Hatch
 
I didn’t know there was any “Dry Storage” on my 23’ for me it is just varying degrees of wet storage locations.

FellowShip

_______________________________________________

My motto: Just for the Grins :D

peterb 04-11-2006 01:45 PM

Re: Dimensions of Dry Storage Hatch
 
Point noted. I am calling it dry storage because that is what it is referred to in the SeaCraft spec's (listed on this web site)


All times are GMT -4. The time now is 05:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft