Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   steering wheel (http://www.classicseacraft.com/community/showthread.php?t=16601)

thewalshies 04-16-2006 10:56 PM

steering wheel
 
Having trouble removing my old steering wheel. I think it might be orginal, any tips? Thanks.

04-16-2006 11:33 PM

Re: steering wheel
 
install puller if available with puller installed and force applied by puller hit bolt on puller downward firmly towards steering shaft, if no puller is available with steering wheel nut off while pulling upward on wheel have someone use a brass punch (as not to damage shaft) and hammer on shaft firmly but be careful somtimes the wheel can release quickly and pulling person should be prepared for the instant release. Good luck

thewalshies 04-17-2006 07:41 AM

Re: steering wheel
 
What kind of puller?

ScottM 04-17-2006 03:42 PM

Re: steering wheel
 
Quote:

What kind of puller?

A steering wheel puller. It is essentially a large screw with 2 clamps threaded on it. As you turn the screw, it pushes down on the steering shaft and the clamps pull up on the steering wheel hub.

thewalshies 04-17-2006 08:02 PM

Re: steering wheel
 
Thanks, do they sell them?

caper 04-18-2006 09:22 AM

Re: steering wheel
 
Yes, even Sears will sell you a steering wheel puller - but be sure your steering wheel has some threaded holes to receive the bolts of the puller.


All times are GMT -4. The time now is 03:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft