Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   WOOD? (http://www.classicseacraft.com/community/showthread.php?t=17193)

Kmodi9 10-25-2006 04:17 AM

WOOD?
 
I have a 76 inboard and was curious if there was any other wood in the boat besides the transom? Thanks!

1bayouboy 10-25-2006 07:24 AM

Re: WOOD?
 
I have a '74 Tsunami that was an I/O converted to outboards/bracket. The original engine mount stringers look like they were wood....now mostly gone....from the samples I drilled out. The keel support is also wood but
seems pretty solid except for a couple of screw/nail holes.
Amazing considering how long water sat in the hull.

The bulkheads, floor and forward deck are plywood cored....
the gunnels are balsa cored.

FELLOW-SHIP 10-25-2006 09:58 AM

Re: WOOD?
 
The deck is laminated with balsa and the cap is laminated with balsa as well.

FellowShip

_______________________________________________

My motto: Just for the Grins :D

Kmodi9 10-25-2006 10:47 AM

Re: WOOD?
 
wow, so there IS alot more wood than i thought in it, bummer :(

FELLOW-SHIP 10-25-2006 03:51 PM

Re: WOOD?
 
Not a bummer that boat is 30 Years Old and sounds like you aren’t have much of a problem. After 30 years that’s pretty good to me. Just look at most 30 year old cars or homes sitting out in the weather for that amount of time. The new composites have only been around for approx 15 years. A lot of the guys have re done their boats with Wood and my bet those boats will out last all of us.

FellowShip

_______________________________________________

My motto: Just for the Grins

Old'sCool 10-25-2006 07:11 PM

Re: WOOD?
 
Some "high end" smaller boat manufacturers still use wood for a very good reason....if properly sealed it's great!

rockdoc 10-25-2006 09:11 PM

Re: WOOD?
 
Hey, the way I see it, wood is a proven product with millions of years of reseach and development........Mother Nature is still using it in the construction of trees all over the world.....

rockdoc

Kmodi9 10-25-2006 10:09 PM

Re: WOOD?
 
dont get me wrong i love wooden boats. I used to build and restore wooden vessels in MA. The only reason I say bummer, is because it confirmsfor me that a complete look through of my boat is in order. I just dont know wether to fish it another year or not before i lay it up for a complete resto. Anybody have a ROUGH idea of what going through one of these boats in fairly good condition and ripping out all of the wood and replacing with composites would cost? I know this is a super vague question, but i just want to know if it is like 5-10k or 20-30 k etc just a ROUGH estimate. Thanks!

Ikan Besar 10-25-2006 10:10 PM

Re: WOOD?
 
there are a lot of multi-million dollar sport fishing boats that are wood. Go look at any custom Carolina boat and see if you can find just one of those "wood free construction" stickers on it!

Kmodi9 10-25-2006 10:30 PM

Re: WOOD?
 
i know! wood is great, it transfers energy through the stringers soooo well. But i wouldnt compare a carolina boat to a balsa cored boat that is 30 years old. The resins and technique they had back then was not what it is today or even 20 years ago. It is my belief that if you are going to use wood in your vessel then use it in a cold molded fashion where you can actually take advantage of all of the great properties of wood. But as far as i am concerned I want all of the wood out of my boat, and it will all be taken out.


All times are GMT -4. The time now is 06:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft