BENNETT M-120 or M-80
 

hi
i am rerigging my 73 20 SF with a 200 merc and seastar pro steering. i want to get trim tabs. why do alot of you guys put those instead of the m80 on ur 20's? thanks

Re: BENNETT M-120 or M-80
 

have 120s on 23 septer work great my pump went south they sent anew one immediately no questions .,agreat company

Re: BENNETT M-120 or M-80
 

I had the M120s on my 20'. They were great for that boat.

Re: BENNETT M-120 or M-80
 

I put M120's on my 1978 MA last year and they are a perfect fit. easy to install and very useful when running with more than two people.

Re: BENNETT M-120 or M-80
 

Hello well i have the m-80 on my 23 ft Sceptre with 225 e-tec, last run of the season last year i had them really workin the bow down and one of them ripped right off my transom. Fortunately Bennett are the nicest people to work with and they replaced it N/C. So i just another Tsunami with stern drive and i'm going to try the M120.

Thanks Mike

Re: BENNETT M-120 or M-80
 

I'm restoring a 1974 23' Tsunami IO,and will powering it with a 350 Mag 300hp Mercruiser.I contacted Bennett and spoke to Tom and a couple others,and they reccomended their 1212Dfe tabs.
They are the 12x12 tabs with the drop(bent edge)fins on them.Tom told me that the bend in the edge of the fin creates more lift,giving the effect of a larger tab,which isn't possible to install,because of the steps in the SeaCraft hull.
I have to say that Tom and the other people i spoke to at Bennett were very helpfull,and extremely proffesional,and a pleasure to deal with.
I'll definitely be using their tabs,and listening to their reccomendations.

Re: BENNETT M-120 or M-80
 

Bennett has some of the best customer service in the industry, if not the best!!!

Re: BENNETT M-120 or M-80
 

If you have not already checked it out, I would suggest looking over at TheHullTruth.com under the Tabman's trim tab discussion.

I asked Tabman what Bennett would suggest for my 20SF with a 200 HPDI and the M120's are what he recomended. Since he works for the company and the fantastic cust. svc. rep. they have, i kinda trust him on it.

Re: BENNETT M-120 or M-80
 

Don't forget they have also donated 2 sets to our site which are being raffled, any size you need, see No Bones thread in Off Topic

Re: BENNETT M-120 or M-80
 

thats whats i put on my 20 SF with a 200 merc. the 120's fit perfectly. i havent used them yet as the boat is still taken apart. :mad: