Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   SeaCraft Photos (http://www.classicseacraft.com/community/forumdisplay.php?f=8)
-   -   New Emblems Mounted-Thanks again Carla!! (http://www.classicseacraft.com/community/showthread.php?t=17684)

Old'sCool 04-01-2007 04:39 PM

New Emblems Mounted-Thanks again Carla!!
 
I couldn't stand it anymore. I had to do it!!! I removed the painted logo's and SC emblem with the usual q-tips and acetone, rubbing compound and lots of elbow grease....It works well after 6-7 hours. I chose 1/8" 316 SS rivets, we'll see how they hold up. I drilled the emblems to .128" (#30) and chamfered the top side to allow the rivet to sit flush. We can't have our rivets sticking out now can we??!!

http://img.photobucket.com/albums/v6.../scemblem4.jpg

http://img.photobucket.com/albums/v6...1/SCemblem.jpg

thedink9 04-01-2007 06:31 PM

Re: New Emblems Mounted-Thanks again Carla!!
 
You win the prize for the first mounted emblem. Where can one pick up a small quantity of ss rivets? First few places I looked only wanted to sell be a box of 500. Dink

65Bowrider 04-02-2007 08:03 AM

Re: New Emblems Mounted-Thanks again Carla!!
 
Reelescape1... Wow, they look great on your boat! Thanks for sharing..
Dink.... hind site... I could have bought the package & mailed out 5 with each emblem. hmmm...next time.

Old'sCool 04-02-2007 08:14 AM

Re: New Emblems Mounted-Thanks again Carla!!
 
I had some left from another job. I would have prefered to thru-bolt them but it really wont work in that position without butchering the liner.

hermco 04-02-2007 09:02 AM

Re: New Emblems Mounted-Thanks again Carla!!
 
Home Depot......Hardware dept.

Bryan A. 04-02-2007 01:09 PM

Re: New Emblems Mounted-Thanks again Carla!!
 
Nice retro look.
I think West Marine also sells individual rivets in the bins.

oldbluesplayer 04-02-2007 02:50 PM

Re: New Emblems Mounted-Thanks again Carla!!
 
Nice Looking !!

Anyone have a decent source for thin teak ? I'm thinking of mounting the emblem onto a teak board, then mounting that onto the outside, just below the side windows, on my Seafari. Probably looking for 2 pcs of teak, say 4" by 12", maybe 1/4 - 3/8 - 1/2 in thick ??

any help on teak source appreciated !!

Bill

Fr. Frank 04-03-2007 01:07 PM

Re: New Emblems Mounted-Thanks again Carla!!
 
West Marine has the thin teak strips. 4" high might be too much to fit below the windows and above the deck of a 20' Seafari.

oldbluesplayer 04-03-2007 02:45 PM

Re: New Emblems Mounted-Thanks again Carla!!
 
Padre - Thanks ! that was a rough guess estimate on the size, I think perhaps 3 x 10-12 is more like it, but there is plenty of room under the side windows.


Bill


All times are GMT -4. The time now is 05:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft