Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   Capt Chuck (http://www.classicseacraft.com/community/showthread.php?t=17740)

LEVERETTE5 04-12-2007 10:19 AM

Capt Chuck
 
Hey Chuck.Just broke open the box for my rub rail from Barbour plastic which has been in my shed for 11 months and I had a surprize,It is shiny white.Can I paint with black awlgrip and do you think it will hold up?My friend calls this the not paying attention charge. Thanks Keith

FELLOW-SHIP 04-12-2007 10:32 AM

Re: Caption Chuck
 
It sound like you got a rubber rub rail since it was in a box not 20’ strips. I have accidentally got a little paint on some of my rubber rub rail when I was doing some tough up work and after it dried it would not just peal off. That being said I would never paint a white one black rub rails RUB and my bet sooner or later you are going to RUB against something that will remove that black paint. If I were you I would learn to Love White or try to sell it on E-Bay.



FellowShip

_______________________________________________

My motto: Just for the Grins :D

LEVERETTE5 04-12-2007 10:48 AM

Re: Caption Chuck
 
Thanks for your reply.The rub rail is not rubber and I also got the 3/4 stainless insert for it.I got the part number from chuck last year when I made the order.My thoughts were the same as your post.I will have to figure out soon for the boat is going to be in big pine most of june and I need to get it painted and back togeather.At this point I think it will go on and then you will no who I am when you see the boat.thanks fellowship

FELLOW-SHIP 04-12-2007 12:11 PM

Re: Caption Chuck
 
Ha Leverette;

What is the Barbour stock numbers on what you got? One of my next projects is going to replace my rub rail. Maybe if you cant learn to Love white I could. :D :D



FellowShip

_______________________________________________

My motto: Just for the Grins :D

Capt Chuck 04-12-2007 12:50 PM

Re: Caption Chuck
 
Keith

I would not paint it either. I would think that if you called Barbour and pleaded your case they would change it out for you with maybe a small restock charge. If not, go the eBay route as Fellowship recommended.

Yamtt125 04-13-2007 12:06 AM

Re: Caption Chuck
 
Hey Leverette,

If you do decide to sell, I might be interested. Let me know.

-Andrew

LEVERETTE5 04-13-2007 09:40 AM

Re: Caption Chuck
 
I am going to take Fellowships and Caption chuchs advise and learn to love it.I am in a time crunch and just need to get it done.I do have the two original cleats from the bow and a lifting ring cleat with hardware if needed.Thanks Keith

EagleOCNJ 04-15-2007 03:35 PM

Re: Caption Chuck
 
I just got a taco rub rail- and its white. I found 3 - 20 foot lengths for 31 bucks each. More for the stainless insert. I like white!

LEVERETTE5 04-15-2007 04:19 PM

Re: Caption Chuck
 
I cut off a little bit and held it up on the boat and it looks better than I expected,sorta like a cadilac with big white walls.Its going on. Keith


All times are GMT -4. The time now is 05:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft