QUESTION ON IMRON PAINT FINISH?
 

HELLO I HAVE A 73 TSUNAMI THAT I JUST PURCHASED THAT I THINK HAS AN IMRON FINISH, IT WAS DEFINATELY PAINTED. I WANT TO KNOW OF THE BEST STUFF TO SHINE IT UP. I HAVE ALREADY USED 3M COMPOUND WITH MY BUFFER AND IT LOOKS 100 TIMES BETTER. IS THERE ANYTHING ELSE THAT I CAN USE ? FIBERGLASSMAN HELP ME OUT HERE THIS IS YOU CUP OF TEA :)

Re: QUESTION ON IMRON PAINT FINISH?
 

A product called 3m perfect-it 3 rubbing compound or same stuff in extra cut dont use a finishing glaze, finishing glaze is basicaly to work on clear coats or to bring out luster the average Joe will buy it and use it and it wont seen like its worth a cr!! it takes a diffrent kind of pad for buffing ( a foam pad )you will probobly burn the paint if you dont have a lot of experiance

Re: QUESTION ON IMRON PAINT FINISH?
 

THANKS FIBERGLASSMAN CAN ALWAYS COUNT ON YOU FOR SPONTANIOUS FEEDBACK, THIS 3M-PERFECT IT DO I PUT THIS ON BUY HAND OR CAN I USE MY MULTISPEED DEWALT BUFFER?

THANKS MIKE

Re: QUESTION ON IMRON PAINT FINISH?
 

High speed buffer with a wool pad you have to constantly clean wool pad so it does not cake up and leave swirl marks

Re: QUESTION ON IMRON PAINT FINISH?
 

THANKS AGAIN FIBERGLASSMAN. :)

Re: QUESTION ON IMRON PAINT FINISH?
 

I use Aqua Buff 2000 that I get from Young Boats and set the buffer at 800rpm with a wool pad.

Re: QUESTION ON IMRON PAINT FINISH?
 

In the next couple of weeks I am going to try to repaint/touch up the imron paint job on my boat. I have been doing some reading up on it.

We will see what happens.

Re: QUESTION ON IMRON PAINT FINISH?
 

The secret to being a pro painter is knowing how to wet sand and buff even the crap I do looks good after buffing

Re: QUESTION ON IMRON PAINT FINISH?
 

I have trouble finding the wool pads for my old buffer 7" Pads, should I go bigger or is there a place in Tidewater, VA. I can buy them?

Knot Working

Re: QUESTION ON IMRON PAINT FINISH?
 

try hamilton marine
http://store.hamiltonmarine.com/browse.cfm/4,21114.htm