Classic SeaCraft Community - changing transom

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - changing transom (http://www.classicseacraft.com/community/showthread.php?t=18197)

vcs	08-13-2007 11:03 PM

changing transom

I was wondering if it would be benificial to raise the transom to 25" from the original 20". I would like to put a new motor on my 1976 18sf. I want to go off shore fishing but don't feel comfortable with the way the transom is so close to the water.

Tony

JohnB

08-13-2007 11:07 PM

Re: changing transom

Yes it is a good idea, but usually it isn't done very well :D.

NoBones

08-14-2007 12:40 AM

Re: changing transom

It is a real good idea to raise the transom!!
This photo was taken at the Anclote CSC gathering this past April. Although not a close up, the yellow 20SF and the orange 20SF both were raised to 25 inch.
Just Do-it!!
See ya, Ken
http://i7.photobucket.com/albums/y27...cture036-1.jpg

All times are GMT -4. The time now is 11:41 PM.