![]() |
starboard or acrylic
Which one holds up better/longer before it yellows - doors made of starboard or those molded acrylic ones (like SSI makes)?
|
Re: starboard or acrylic
Wow, no replies yet? The reason I asked is that I hate having a nice pretty white fiberglass boat with a bunch of sun-yellowed plastic hatches and doors. I was just wondering if anybody had any brilliant ideas on minimizing that.
|
Re: starboard or acrylic
I am using Seaboard on my boat. It is supposed to be UV resistant "USDA Cutting Board". Search US Plastics website for info. They have different thicknesses and sheet sizes. I am using 3/4" thick. Have it cut but not installed yet. I am using acrylic for my dash and am gluing really cool "Seacraft Lettering" a CSC member made for me.
|
Re: starboard or acrylic
I've had starboard on my boat with 3 years of direct Florida sunshine with no yellowing or surface breakdown.
|
Re: starboard or acrylic
I live on Cape Cod and have replaced the teak drop down door that allows access to the stern well and outboard. Have had it in place for over 3 years with no yellowing.
|
Re: starboard or acrylic
In my other boat that I had for over 10 years I had Starboard entry doors, and they never yellowed. I live in SW FL. The previous owner had the boat for 5 years.
|
Re: starboard or acrylic
starboard and acrylic won't yellow or get damaged by UV. Those white molded pieces and hatches by SSI and your basic Igloo cooler parts are a totally different material, that does, over time, get damaged by the UV if not covered. In my experience, speakers, pie-hole plate hatches, Rabud plastic hatches, and GPS antennas have been the worst in yellowing. True acrylic (gloss) and starboard (texture) will not yellow.
|
All times are GMT -4. The time now is 04:26 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft