Classic SeaCraft Community - Quick Fair...Epoxy Coat?

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - Quick Fair...Epoxy Coat? (http://www.classicseacraft.com/community/showthread.php?t=18946)

Islandtrader

03-23-2008 09:24 AM

Quick Fair...Epoxy Coat?

Just got my quick fair in and noticed on the can it states:

Before painting this product must be coated with epoxy resin.

For you out there using this product, have you been doing this?

strick

03-23-2008 01:31 PM

Re: Quick Fair...Epoxy Coat?

Is it system 3 quick fair? If so then you can sand and spray over it with awlgrip 545 primer and then paint over that.

strick

Islandtrader

03-23-2008 08:58 PM

Re: Quick Fair...Epoxy Coat?

Yes it is Systems 3...I got it based on your post. It is on there label, so I was wondering if you had to do it.

Now if I read your answer you did not epoxy over it first and every thing is OK.

strick

03-25-2008 11:14 AM

Re: Quick Fair...Epoxy Coat?

Well in essence I did. The awlgrip 545 is an epoxy based primer.

Rule of thumb is that you cannot put polyester over epoxy but you can epoxy over polyester....therefore since system 3 quick fair is a epoxy based product anything you put over it must also be an epoxy based product.

strick

All times are GMT -4. The time now is 01:26 AM.