Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   225 HP Evinrude on 18 CC (http://www.classicseacraft.com/community/showthread.php?t=18953)

waltert 03-26-2008 07:54 AM

225 HP Evinrude on 18 CC
 
Hi All,
I have a 1989 18 CC with a 25" transom, this model was offered with a 150 hp V6 from the factory, I have a good 225 V6 Evinrude that i am thinking of hanging on the boat, I know it will be tons of power,,,, does anyone know how much heavier the 225 V6 is than the 150 hp V6. Will the extra weight be to much?

Thanks,
Walter

peterb 03-26-2008 09:05 AM

Re: 225 HP Evinrude on 18 CC
 
Walter,

According to the NADA web site, a 225 seems to be about 75 pounds heavier.

Also, the boat was rated for up to 150 HP. That seems to be a lot of power and weight.

It will be interesting to read some of the other responses.

Peter

76Red18 03-26-2008 10:14 AM

Re: 225 HP Evinrude on 18 CC
 
The 150 Johnson on my 18 weighs around 375. Maybe with a new transom and a 3" raised deck I would consider more weight. IMO the hull would handle 225hp with no problem. Insurance companies and the Coast Guard wouldn't have the same opinion though. Hermco installed a bracket on an 18 powered by a 175. I'd love to see some performance numbers on that and hear whether the owner thinks it could handle more weight and hp.

76Red18 03-26-2008 10:23 AM

Re: 225 HP Evinrude on 18 CC
 
I would think a 25" transom would also be a must.

Snookerd 03-26-2008 10:33 AM

Re: 225 HP Evinrude on 18 CC
 
You could do it and just work around the weight and speed differences. There has been an 18SF in the Tampa area that had a 225 on it for a while. The only reason to do it is the cost savings tied to having a motor on hand to hang on the boat(which is how many of us make decisions to boat these days [img]/forum/images/graemlins/tongue.gif[/img]).

Keyscruz 03-26-2008 01:34 PM

Re: 225 HP Evinrude on 18 CC
 
I have a 1978 18 cc with new raised transom and alum bracket with large flotation chamber. New etec 150 which weighs 430 lbs. Cockpit drains fine but probably would not without the bracket. Don't know speed #s yet but it begins to get squirrely at wot. Boat US will probably insure at an agreed value.

Briguy 03-26-2008 02:20 PM

Re: 225 HP Evinrude on 18 CC
 
Once when I was in the keys I saw a 20 on a trailer with twin 2.5 merc's on it. No kidding.

NoBones 03-26-2008 06:29 PM

Re: 225 HP Evinrude on 18 CC
 
SUICIDE !! :eek:

See ya, Ken

76Red18 03-26-2008 07:15 PM

Re: 225 HP Evinrude on 18 CC
 
Quote:

SUICIDE !! :eek:

See ya, Ken

Didn't I see a post that said SeaCrafts were designed to be ran fast and hard? :eek: Whats a 2.5 rated at? 265 or so?

76Red18 03-26-2008 07:18 PM

Re: 225 HP Evinrude on 18 CC
 
Heck give a shot, you can always take it off.


All times are GMT -4. The time now is 03:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft