Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Performance (http://www.classicseacraft.com/community/forumdisplay.php?f=5)
-   -   prop size for 140 zuki (http://www.classicseacraft.com/community/showthread.php?t=19400)

shawn1127 07-27-2008 09:53 AM

prop size for 140 zuki
 
guys i need your help agin iam picking my new eng up this week i talked to a guy in pompano last week says thay have installed a few 140s on 20'sf and swung 20 or 21 pitch prop
i have looked thru past threads and have not found a
discussions on this motor and prop config i no some of you
are running this eng any help i would be greatfull
thanks

shawn1127 08-01-2008 08:31 PM

Re: prop size for 140 zuki
 
went w/21 pitch i will see how it works

muddywater 08-17-2008 12:38 AM

Re: prop size for 140 zuki
 
While we are asking about Zuki's, what sayeth the prop gurus on the pitch of a Rev 4 on a Zuke 175 for a SF20?

Merc Prop Selector says 14.625" x 23"

shawn1127 08-18-2008 08:45 PM

Re: prop size for 140 zuki
 
14 x21 ran fine but max rpm was 5700 got a 14x19 should do the deal time will tell 29@4000 is nice though

Jon G 08-18-2008 10:54 PM

Re: prop size for 140 zuki
 
My 20' came with a 20 Suzi prop and it only topped out at 5700rpm (bottom of the WOT rpm range), I switched to an 18 and now it revs to the max 6200rpm at wot and is much more responsive with a beter whole shot and better fuel economy the 20" pitch was borderline for my boat boat the 18" is perfect. Fully loaded heavy boat will just make 6200.


All times are GMT -4. The time now is 07:30 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft