Bilge Paint
 

I would like to paint the bilge of my 23 inboard and was curious if anyone could recommend a good product. I will be brushing it if that makes a difference.

Thanks in advance.
Chris

Re: Bilge Paint
 

I used a 2 part epoxy called Tile Clad from Sherwin Williams.

It only comes in gallons, and runs around a $100 and change.

The reason I used this, is that it is white and that it goes on nicely with a brush and roller. This is the same stuff they use to coat the inside of water towers...so water will not hurt it.

There are specific bilge grey paints that are fine also so the choice is yours.

Re: Bilge Paint
 

Pettit also has a epoxy bilge paint and comes in Quarts.@ Boaters World & West Marine.

Re: Bilge Paint
 

I even used the gray garage floor epoxy with good results.