Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   Can you tell me (http://www.classicseacraft.com/community/showthread.php?t=20037)

DickOdonovan 02-21-2009 11:39 PM

Can you tell me
 
What is the basic difference between say a 1970/1980/2000 hull, is it design, construction, fit & finish ? Which is better and why? Thanks in advance.
Dick O'D

AngusCrock 02-22-2009 01:50 PM

Re: Can you tell me
 
If it's no Moesly\Potter lad...It's CRAP

Dilligaf 02-22-2009 03:23 PM

Re: Can you tell me
 
Quote:

If it's no Moesly\Potter lad...It's CRAP

not true.... maybe not as heavy duty but diffinately not crap. still good quality.

bridgeman 02-22-2009 05:40 PM

Re: Can you tell me
 
I own a 81 23'cc, to be honest I've never seen a potter built from the 70's or Moesly. I am however impressed with the stoutness of everything on my boat. I've seen the tracker era boats of the late 80's and can't tell the difference. Probably the weight would be lot lighter and the overall fit/finish isn't quite what I've noticed on mine. I don't know what the max. hp rating on the trackers is but they must have felt pretty confident in hanging a 500 hp max. on mine. Saw the pic's of the newer ones at Miami boat show and they look like a whole different animal and along with it a price tag that is so far out of my reach except if I'm lucky enough to get 6 numbers and the powerball.

Islandtrader 02-22-2009 06:35 PM

Re: Can you tell me
 
I look at the Seacraft Line the same way I look at Corvettes.

There is no such thing as a bad Corvette/Seacraft...some are just better than others. ;)

Tarpun 02-22-2009 09:33 PM

Re: Can you tell me
 
Ditto

Finster 02-22-2009 09:59 PM

Re: Can you tell me
 
Dick, this topic has been beaten to death on this site. Use the search tool and I'm sure you'll find answers to questions you didn't even know you had. :rolleyes:

I will say one more thing on the subject. There is a reason for this site and it's not cause we like old [censored].

FELLOW-SHIP 02-23-2009 08:03 AM

Re: Can you tell me
 
Quote:

I look at the Seacraft Line the same way I look at Corvettes.

There is no such thing as a bad Corvette/Seacraft...some are just better than others. ;)

Great way of saying it.

FellowShip

………………………….

Just for the Grins :D

Official Antique Classic SeaCraft Owner

Fr. Frank 02-23-2009 10:31 AM

Re: Can you tell me
 
I go a little beyond that. I have yet to see any boat that is faithful to the Moesly hull design that is a bad hull. That includes Sailfish, Albin, Palm Beach, etcetera. (I especially like the Albin with the turbo diesel motor under the center console)

To paraphrase, "They're all good. There is no such thing as a bad Corvette/Seacraft/VDH hull...some are just better than others."

bitsamonkey 02-24-2009 03:07 AM

Re: Can you tell me
 
Construction may have changed, but so did layouts, and a lot of people might prefer the later styles. I figure the older the boat, the more problems you're inheriting. Take your time and find a really great old hull with a transom that has been professionally replaced and raised or plan on doing it yourself. The very early boats have little usable storage with the tank above deck under the console. Brand new, the old ones may have been better in some ways but they're all projects by now.


All times are GMT -4. The time now is 12:12 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft