![]() |
New Projects
Hopefully starting in April I am planning on doind a few small projects on my familys 23 foot 1984 seacraft center console. I do have some questions though, how do you: restore teak, clean/polish fiber glass, and what do you use to clean stainless? Lastly is it possible to save a console window that has crystalized? We will also be having this icom m504 radio installed,
http://i605.photobucket.com/albums/t...s/100_1756.jpg Arioch :D |
Re: New Projects
Any one?
|
Re: New Projects
I do have some questions though, how do you: restore teak,
Teak: The last time I did it I sanded (thoroughly) and applied 3 coats of Sikkens Cetol. It lasted about 2 years in southern SC sun. clean/polish fiber glass,Meguires and others have complete systems for this. Bring on the elbow grease :) and what do you use to clean stainless? A phosophoric acid solution (Mary Kate on/off) will remove the rusty looking stains left from SS. The metal itself if not too bad can be brought back with a mild abrasive made for fiberglass...Meguires restore and wax or similar. Again, bring on the elbow grease. Lastly is it possible to save a console window that has crystalized? replace it. We will also be having this icom m504 radio installed, Excellent radio. I have it also. Wire it to your GPS for DSC and emergency signaling. Post some pics!! Good luck!! |
Re: New Projects
Sikkens Cetol, is this teak oil or varnish? It will be wired to the gps, also how do you register the dsc? Here she is,
http://i605.photobucket.com/albums/t...100_1767-1.jpg No more pics until this snow melts (we are having a noreaster as we speak)right now she is sleeping nicely in the garage in chealsea ma. Till then dont worry because when i start you guys will have pictures and videos.Thanks! Arioch :D |
Re: New Projects
|
Re: New Projects
Thanks
Arioch |
All times are GMT -4. The time now is 03:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft