Classic SeaCraft Community - High Voltage Output

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - High Voltage Output (http://www.classicseacraft.com/community/showthread.php?t=20268)

rcnight

04-26-2009 08:27 PM

High Voltage Output

I'm reading +18 volts on my '97 Evinrude 150. If I'm reading the manual correct, the problem could be in the stator and/or the regulator. Tried another voltage gauge with the same results. Anyone had similar problems & how did you fix?
Thanks in advance.

stumpie2

04-27-2009 12:41 AM

Re: High Voltage Output

i would start with the regulator.... sounds like a good way to fry the other electric components

castalot

04-27-2009 09:02 PM

Re: High Voltage Output

my 130hp went to 16 volts and my issue was a bad battery for that engine switched the batteries and the other engine went up to 16.5 new battery and so far so good

Fr. Frank

04-27-2009 10:46 PM

Re: High Voltage Output

I have a '06 90 Optimax, and I had my voltage go up to 15.8v in Jan. Turned out I had a bad cell in the battery. Changed the battery and all's well.

eggsuckindog

04-28-2009 02:27 AM

Re: High Voltage Output

My Rude went up and was just a bad connection on the batt - it will charge if isn't making a good connection

All times are GMT -4. The time now is 01:06 PM.