Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   Help identify this hull! (http://www.classicseacraft.com/community/showthread.php?t=20343)

Fr. Frank 05-11-2009 04:48 PM

Help identify this hull!
 
Guys, it's driving me crazy. In the back of my tiny brain, I know this hull design, but I cannot put a name to it. Please help me with naming the manufacturer. It has a distinctive lifting strake configuration. My brain says I've seen this design in boats in the 30'-35' as well as the 18'-23' range.

This one is 23'6" from 1968, and the cap and cabin are not original.


http://i.ebayimg.com/06/!BR7eung!Wk~...DoeI!~~_12.JPG

castalot 05-11-2009 05:44 PM

Re: Help identify this hull!
 
bertram? maybe not but it does look familar

BigLew 05-11-2009 06:16 PM

Re: Help identify this hull!
 
My first reaction is Bertram as well. The other thing may be a Bertram knockoff, say ??; can't think of any at the moment,but there were some to be sure. The give away for me is the "bellying" look of the hull profile as it proceeds aft.

BigLew 05-11-2009 06:19 PM

Re: Help identify this hull!
 
Stamas, maybe? I know that they mad a Stamas 24 which is in the ballpark lengthwise and the time is about right.

ScottM 05-11-2009 07:30 PM

Re: Help identify this hull!
 
I agree, looks like a scaled down version of the Bert 31.

stumpie2 05-11-2009 07:37 PM

Re: Help identify this hull!
 
bertram moppie, or small black fin maybe????

deepsushi 05-11-2009 08:59 PM

Re: Help identify this hull!
 
Looks like a Ray Hunt designed hull... Surfhunter perhaps?

BigLew 05-11-2009 10:12 PM

Re: Help identify this hull!
 
That could be it- Ray Hunt design. Check this out. I think Deepsushi's got it. Good catch, regardless.

http://www.huntdesigns.com/images/pa...moppie2-lg.jpg

http://www.huntdesigns.com/documents...tory-panel.pdf

http://www.huntdesigns.com

Fr. Frank 05-11-2009 11:42 PM

Re: Help identify this hull!
 
Quote:

Guys, it's driving me crazy. http://i.ebayimg.com/06/!BR7eung!Wk~...DoeI!~~_12.JPG

Notice the chines / strakes do NOT meet at the bow, but run continually parallel to the keel. Every other Hunt design I've seen meets at the bow in some fashion.

I know the Limestone 24. This isn't it. The Limestone's basically a copy of the Bertram 25 hull, where the chines converge at the bow.

Someone pm'd me over on THT and said it is definitely a 23' Larson from the late 60's / early 70's. Being a Florida native, I don't know Larson that well, and couldn't find any 23' Larson hull pics to compare.

htillman 05-12-2009 01:02 AM

Re: Help identify this hull!
 
Looks to have some Bertram pedigree but, the strakes do not look right. Get more pics, from the side and aft facing forward. Bertram did build a 20 and 25 but I do not think a 23.
ET


All times are GMT -4. The time now is 02:03 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft