Classic SeaCraft Community - hynautic steering question

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - hynautic steering question (http://www.classicseacraft.com/community/showthread.php?t=20389)

Abe's Rocket

05-23-2009 04:12 PM

hynautic steering question

launched boat today...helm spins free, no steering at all. Does this sound like a steering fluid issue? I know jack about steering systems.

thx

hermco

05-23-2009 07:44 PM

Re: hynautic steering question

What kind of steering? Hynautic or Sea Star?

joey	05-24-2009 09:32 PM

Re: hynautic steering question

Pump 'er up to about 25psi...you should be good.

JohnB

05-25-2009 08:57 AM

Re: hynautic steering question

I would look for a leak, at the helm, or at the cylinder on the motor. If it is an original hynautic, the resevior has a site bubble that you can see the fluid level, and most have a pressure gauge on top. Even if there is no pressure, if the system has fluid in it, it will still turn.

If you need a cylindar on the back, and it is a splash well, not a center link, I have an almost new one.

Abe's Rocket

05-25-2009 08:04 PM

Re: hynautic steering question

thanks for the feedback. someone is looking at it tomorrow and I should know more by then

All times are GMT -4. The time now is 07:43 AM.