![]() |
Ladder and swim platform for a 20 footer??
Need to put a ladder with a swim platform on the back of my 20 foot Center Console Outboard model, I have trim tabs so looking for something that will not get in the way of the tabs. I have twin 4 year olds a 6 year old and a wife that refuses to use the rope ladder I already have!
Recommendations appreciated.... |
Re: Ladder and swim platform for a 20 footer
It's not that hard to make one that's better than almost anything you can buy, and ladders are unnecessary if you do it right. A friend of mine and I each made one like this for our Seafari's over 30 years ago. http://i188.photobucket.com/albums/z...twfullfuel.jpg
Here's wife and daughter using it in the Abaco's in late '70's. http://i188.photobucket.com/albums/z...PelicanCay.jpg Bought an 8' length of stainless tubing and a 1" thick piece of teak; used a conduit bender on the tubing and his Shopsmith to cut the planks and drill the holes to mount the planks. Took us about 8 hrs to make 2 very nice and light half platforms. Mounted to transom using stainless bimini top fittings which allow it to fold up when not in use. Removal of 2 screws allowed it to be taken off for fishing. If you mount it correctly (right at the waterline, so it's just about awash when someone's on it; most swim platforms are mounted way too high!), you might not need a ladder. I did have a removable 3-step ladder I could use on this one when I had someone along not agile enough to get aboard w/o a ladder. If your wife and kids can get out of a pool w/o a ladder, they would not need one for this type of platform if you mount it right. For scuba, if you just take off tank in the water, you still don't need a ladder! |
Re: Ladder and swim platform for a 20 footer??
I have a port and starboard platform and ladder that came off a 20 Master angler I am going to sell. it is stainless steel and starboard. Let em know if you are intereted, might save you some time and money.Thanks
|
Re: Ladder and swim platform for a 20 footer??
I used a standard teak dive platform and replaced
the the single step with a drop down 3 step. Trust me, the women and children will thank-you for the extra steps. I have to admit the older I get the more I like it as well. It folds up great and makes it real easy to get back in. Oh yeah, I had to cut the teak lateral slat close to the transom to allow for the trim tab. No big deal at all. http://i7.photobucket.com/albums/y27...tLadder001.jpg http://i7.photobucket.com/albums/y27...tLadder002.jpg See ya, Ken |
Re: Ladder and swim platform for a 20 footer??
Or you could put these on.
http://i482.photobucket.com/albums/r...Picture177.jpg |
Re: Ladder and swim platform for a 20 footer??
Absolutely the 3 step - I think mine is the same brand as Ken's and its worked for 5 yrs at least. In deep water you can't hardly get up on 1 step. We also use it in shallow water by using a velcro tie to tie up the last step so it doesn't bump. I'll go check my brand - Windline got it from these guys
http://americanmarinesrv.com/americanmarine/p1.htm |
All times are GMT -4. The time now is 08:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft