Anyone with a 20cc and a 150-175 60 degree looper?
 

If anyone has a Johnson/Evinrude 60 degree v-6 on a 20cc Id be curious what kind of performance #'s you get. Thanks

Re: Anyone with a 20cc and a 150-175 60 degree looper?
 

Somebody just got a new 150 but I forget the exact screen name

Re: Anyone with a 20cc and a 150-175 60 degree looper?
 

Still only seeing 5200 light. My Mirage + is going to Bobby Soles soon.Best I`ve seen is 42 mph 2 way gps bimini down light load 3 people. `96 150 OP.

GFS

Re: Anyone with a 20cc and a 150-175 60 degree looper?
 

My new 150 is an ETEC - if I am who you were thinking about. I did post the numbers I was getting on this page

Re: Anyone with a 20cc and a 150-175 60 degree looper?
 

i just got a new johnson 150 (60 degree) on my 18. not exactly the same but you arent getting a ton of responses so may be helpful. 15x16 prop, 5500 wot gets me 42-44. 4000 rpm around 32 mph. burns about 2 mpg (sorry, fuel consumption gauge not working) on average, driving between 3500-4500 over 30-40 mile days. very heavy 18 footer, big t top, heavy custom baitwell, lots of wooden hatches/doors, lots of fishing gear. hope this is helpful.

Re: Anyone with a 20cc and a 150-175 60 degree looper?
 

I have a 1979 18' with a 1994 175 Johnson looper. I need to prop better because I do turn too many rpm at WOT 6200. With the boat trimmed right it runs 43 at WOT and cruises at about 30 at 4500 from what I can remember. Its duck season and that boat is stored until springtime.

Re: Anyone with a 20cc and a 150-175 60 degree looper?
 

Greno increase that pitch 2" and you will pick up at least 2MPH at cruise which is where you want it - amazing difference going up in pitch at cruise. Not to mention the fuel savings would probably pay for it pretty quick, its like driving in 3rd gear all the time - do it