Scuppers on an 18
 

The scuppers have been removed on my 18 and I cannot see where they were. I still have the floor drains behind the baitwell in front of the motor well, but does anyone have a photo of where they are supposed to exit the hull?

Re: Scuppers on an 18
 

What year is your boat?

I owned a 1976 SeaCraft 18' and the floor drained into the bilge...

-Great little boat but the scupper design sucked and the floor was 2.5" lower than it should have been.

Re: Scuppers on an 18
 

My 18 was built in 77, registered in 78 and I don't have any drains other than out the back of the splashwell, then I have a splashboard that is sealed up with drain holes that i keep plugged except when I'm underway. of course excess will go to the bilge thru the baitwell.

Re: Scuppers on an 18
 

Ditto!