![]() |
1979 23' SC with 250 Etec
I am a new member with a question.
I am looking at a 1979 23' Seacraft with no bracket that has a 250 Etec on it, does anyone have any performance numbers ? thanks |
Re: 1979 23' SC with 250 Etec
welcome to the family the boat should be great you'll love the 23....i do i though about doing that with mine i would love to hear how it runs as well |
Re: 1979 23' SC with 250 Etec
Don't know about the 250, but I love my 150 ETEC on my 20SF. Sips gas...
|
Re: 1979 23' SC with 250 Etec
It should run close to 50 wot as for fuel burn numbers gph mpg and rpms,im not sure but its a good fit for that boat. Im not sure there is an active poster with that combo but if there is id like to know as well.
|
Re: 1979 23' SC with 250 Etec
I have a 23 with a pair of etecs 150's
38knts flat out cruise at 31knts economy is very good, oil averages out at 80 to 1 with xd100 averaged 4 gal per hour last year , that includes all trolling and running |
Re: 1979 23' SC with 250 Etec
I think 50 mph would be a stretch.
I have a tight 225 Yami 2 stroke (411 lbs) and w/ a very light load I get 43 mph (GPS). |
Re: 1979 23' SC with 250 Etec
I have a '74 SeaCraft with full transom and a portabracket with a 250 E-tec. It jumps up and goes, tops at 41 knots on gps. Very economical compared to my old 225 Johnson.
|
All times are GMT -4. The time now is 11:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft