Classic SeaCraft Community - 75 SF18 Factory Splashwell Question

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)

- - 75 SF18 Factory Splashwell Question (http://www.classicseacraft.com/community/showthread.php?t=21244)

uncleboo

02-03-2010 04:33 PM

75 SF18 Factory Splashwell Question

I was looking around for interesting pictures and came upon Paul Toppino's '76 18 on the main web site 'SeaCraft Photos' paying particular attention to the splashwell. Then I started looking at mine. They are very different in size. Mine measures +/- 16" from the front edge of the top to the rear of the cocpit and +/- 35" wide.
http://i833.photobucket.com/albums/z...s/100_1888.jpg
My question is, do I have the correct one or do I have one from a 20'er? Paul's looks much more size appropriate than mine with regards to how much it sticks out. Any ideas?

76Red18

02-03-2010 06:13 PM

Re: 75 SF18 Factory Splashwell Question

Thats factory for an 18. I removed mine and replaced it with a piece of starboard. My Johnson has a tilt limit switch that I adjusted to keep the cowling from hitting the splash board.

Bigshrimpin

02-04-2010 11:37 AM

Re: 75 SF18 Factory Splashwell Question

Quote:

My question is, do I have the correct one or do I have one from a 20'er? Paul's looks much more size appropriate than mine with regards to how much it sticks out. Any ideas?

The 20 MA has a similar well that's about 4" wider and has different edges.

uncleboo

02-04-2010 11:39 AM

Re: 75 SF18 Factory Splashwell Question

Thanks guys. I feel much better now. :)

All times are GMT -4. The time now is 12:10 AM.