HIN Identification Assistance (1987 18 SF)
 

Hello All. Need help deciphering actual manufacturer of Vezo, Part I's 1987 18 SF. Hin is SICF8100B787. Original/ previous owner led to believe it was one of the last "Potter Built". Not sure if possible, but interested. Thanks to anyone who can help.

With a limping 1995 rebuilt Johnson 150, and newly discovered fuel tank leak, we are assessing true value. The original 47 gallon aluminum cell has a pitted opening on top nearly the size of a pencil. At approximately $10/gallon, do we want to try and remove and replace ourselves. Any information appreciated. Has anyone been able to slide console forward enough to gain access without complete removal? In the initial size-up stages. Thanks. Vezo, Part II.

Re: HIN Identification Assistance (1987 18 SF)
 

i have a 1979 18' and can just lay the console over to the side with the control and remove tank hatch and i believe i have more than enough room to remove tank as well. my tank is 47 gallons and was made in 1996 i think

Re: HIN Identification Assistance (1987 18 SF)
 

'85 18' and was able to do the same. Console slid to the side pulled deck plate then tank. 47 gallon tank was only 8 in. deep so it came out easy.

Having a hell of a time pulling the fill and vent hoses because of the foam under the fish box. Have cut two access holes and still cannot cut away enough foam from the fill hose to move it.

Re: HIN Identification Assistance (1987 18 SF)
 

Any way my brother and I could come check it out? Thanks. Part II.

Re: HIN Identification Assistance (1987 18 SF)
 

Check PM's for my phone number

Re: HIN Identification Assistance (1987 18 SF)
 

1987, No Not "Potter Built"

According to Mr Potter, he left SEC 1980, stayed on the board of directors for SIC 1 year after. He was gone by 1982

Re: HIN Identification Assistance (1987 18 SF)
 

Thanks Captain Chuck. We can put that one to bed. Have a good weekend. Part II.

Re: HIN Identification Assistance (1987 18 SF)
 

Hey,

Great seeing you guys yesterday. I have both your cell phones programed and will call when I come to your side of the county.

Let me know how your repair finishes up and I will do the same.

Mick

Re: HIN Identification Assistance (1987 18 SF)
 

Hope I'm not too late, but, is it possible to get any pictures of the fill tube and/or what's in there? My filler hose is beginning to look aged and I'd like to be better prepared when the time comes to replace.

Re: HIN Identification Assistance (1987 18 SF)
 

Uncleboo-

I will try a picture or two tonight. But... imagine the fill hose surrounded by foam from 4 inches below the cap to the front of the tank. And you have no access to it.