Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   Missing hull#... (http://www.classicseacraft.com/community/showthread.php?t=21894)

willydewitt2 08-09-2010 05:28 PM

Missing hull#...
 
Were there any other places that a hull# ID# would be found on a early 70's 20SF. I think it is a 72, but someone ground off hull# from transom when doing transom before I acquired boat.

FELLOW-SHIP 08-09-2010 06:28 PM

Re: Missing hull#...
 
I am not aware of any other location for the ID #.
Do you have a Title that says SeaCraft? It would have the original ID # on it.
If you don’t than here in Fl. the only way to register the boat will be would be as a Home Built boat.


FellowShip

………………………….

Just for the Grins :D

Official 23’ SF Antique Classic SeaCraft Owner

strick 08-10-2010 03:01 AM

Re: Missing hull#...
 
The hull ID was not required to be stamped on the transom until sometime in mid 1973. Most likely your boat never had the ID stamped on the transom. It would have been on an aluminum sticker mounted somewhere inside the boat.

strick


All times are GMT -4. The time now is 12:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft