Inboard diesel 1974 23' seacraft potter hull
 

1974 23 SEACRAFT POTTER HULL , STRAIGHT INBOARD DIESEL -VOLVO TAMD 40 ,BOAT WAS TOTALY REBUILT,HARDLY USED SEA LYON TRAILER WITH BRAND NEW ROLLERS, 2 BRAND NEW BATTERIES, 100 2X 55 GALLON TANKS (TANKS WERE REMOVED, CLEANED AND COATED BEFORE REINSTALL), CRUISES AT 22 KNOTS AND BURNS ABOUT 5 GALLON PER HOUR,I HAVE EXTRA PROPELLER AND SHAFT, SEASTAR HYDROLIC STEERING WITH RAYTHEON AUTOHELM AUTOPILOT ,RAYMARINE CHARTPLOTTER AND RADAR RL 60, DEPTHFINDER, RAYMARINE VHF, 15 FOOT SOLID OUTRIGGERS,2X 90 DEGREE SWIVEL RODHOLDERS AND 2 REGULAR, NEW GELL COAT O THE HULL , NEW PAIT IN TOP SHELL WITH NON SKID PAINT,INSIDE RAIL WAS POWDER COATED WHITE,NEW RUBRAIL,CUSTOM CENTER CONSOLE THAT HINGES FROWARD FOR EASY MAINTENANCE, LOTS OF ACCESS HATCHES IN THE CONSOLE FOR EASY ACCESS, MULTIPLE BILGE PUMPS TO KEEP THE HULL INSIDE DRY (ONE IS LOW PROFILE UNDER THE OIL PAN (BIGGEST PROBLEM FOR INBOARD OIL PANS TO GO BAD), RAW WATER WASHDOWN , ENGINE RAW WATER INTAKE SEACOCK WITH THE FRESH WATER HOOKUP FOR ENGINE FLUSHING,HIGH WATER ALARM. I HAVE THE CURTAINS FOR THE CENTER CONSOLE BUT THEY ARE NOT IN THE PICTURES. THE BOAT HAS A TUNA DOOR INTHE TRANSOM. THIS BOAT WAS ORIGINALLY REBUILT BY MARINE MECHANIC IN CHATHAM ON CAPE COD (HE INSTALLED THE DIESEL), I PRETTY MUCH FINISHED LOTTS OF OTHER UPGRADES. I LIVED IN CT AND DID NOT USE THE BOAT ENOUGH AND NOW I AM IN FLORIDA AND I NEED DIFFERENT BOAT.BOAT WAS EITHER ON THE LIFT OR STORED INSIDE. WE SPENT NO EXPENSE TO MAKE THIS BOAT WHERE IT IS NOW BUT IT IS NEVER DONE OR FINISHED. I HAD THE BOAT FOR A WHILE BUT WAS NOT USED TOO MUCH, I SPENT MORE TIME WORKING ON IT THAN USING IT. PLEASE CALL ME ABOUT ANY FURTHER DETAILS. I HAVE LOT MORE PICTURE AND I CAN SEND YOU ACCESS TO MY ALBUMS ON THE PHOTOBUCKET.I BOUGHT THIS BOAT FOR 25K AND SPENT ABOUT 15K TILL NOW. I AM ASKING $30,000. PLEASE CALL ME ONLY WITH SERIUOUS INQUIRIES. BOAT IS LOCATED IN STUART ,FL.
YOU CAN REACH ON MY CELL 772-631 9742.

http://i910.photobucket.com/albums/a...acraft2062.jpg
http://i910.photobucket.com/albums/a...acraft2058.jpg
http://i910.photobucket.com/albums/a...acraft2079.jpg
http://i910.photobucket.com/albums/a...acraft2099.jpg
http://i910.photobucket.com/albums/a...acraft2095.jpg
http://i910.photobucket.com/albums/a...acraft2072.jpg
http://i910.photobucket.com/albums/a...acraft2096.jpg
http://i910.photobucket.com/albums/a...acraft2091.jpg
http://i910.photobucket.com/albums/a...acraft2088.jpg
http://i910.photobucket.com/albums/a...acraft2087.jpg
http://i910.photobucket.com/albums/a...acraft2085.jpg
http://i910.photobucket.com/albums/a...acraft2084.jpg
http://i910.photobucket.com/albums/a...acraft2071.jpg
http://i910.photobucket.com/albums/a...acraft2070.jpg
http://i910.photobucket.com/albums/a...acraft2066.jpg
http://i910.photobucket.com/albums/a...acraft2067.jpg
http://i910.photobucket.com/albums/a...acraft2063.jpg
http://i910.photobucket.com/albums/a...acraft2067.jpg
http://i910.photobucket.com/albums/a...acraft2100.jpg

Re: Inboard diesel 1974 23' seacraft potter hull
 

Wow.

This would be a heck of Giant BFT machine.

Re: Inboard diesel 1974 23' seacraft potter hull
 

I can't see this lasting long. Very nice!!

Re: Inboard diesel 1974 23' seacraft potter hull
 

The previous owner had a 500 plus pound giant bluefin tuna on this boat, he used to run 55 miles to BB by himself.

Re: Inboard diesel 1974 23' seacraft potter hull
 

Welcome to CSC Spirit.
Nice Looking SeaCraft Stan! I have not seen the boat around the waterways here in Stuart :eek: Maybe we can touch base in person some day.

I can't see any hinges or the like. Is the motor serviced via the 4 hatches around the console? How about the gauges, electronics and the switches. How do you get to them?

Re: Inboard diesel 1974 23' seacraft potter hull
 

The hinges are in the front of the center console, the hatches are are only for simple access to check oil and flid levels.

Re: Inboard diesel 1974 23' seacraft potter hull
 

Please feel free to call me anytime, the boat has been in storage more than on the water, I live on poppleton creek in Stuart.

Re: Inboard diesel 1974 23' seacraft potter hull
 

Sorry correction 350 pound BFT

Re: Inboard diesel 1974 23' seacraft potter hull
 

That thing looks great!
If I was in the market I would definitely be contacting you.

Re: Inboard diesel 1974 23' seacraft potter hull
 

here is the picture of the hinges

http://i910.photobucket.com/albums/a...acraft2005.jpg