Classic SeaCraft Community - wrappng top of transom

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - wrappng top of transom (http://www.classicseacraft.com/community/showthread.php?t=21942)

Tashmoo2

08-23-2010 06:08 PM

wrappng top of transom

new marine plywood transom installed from inside with 1708 and epoxy. The top of plywood is exposed as the 1708 would not bend around the top. What is best way to cover the exposed top?

DonV	08-24-2010 09:40 AM

Re: wrappng top of transom

You will need to go with a lighter fiberglass cloth, radius the top edges and tie back into the existing fiberglass....oh yeah and then fair and sand if needed. 1708 will not wrap a tight radius, two or three layers of lighter cloth will and provide a seal for the top of the wood.

All times are GMT -4. The time now is 10:15 AM.