Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   Time to get back into it (http://www.classicseacraft.com/community/showthread.php?t=22043)

Lenny 09-25-2010 09:38 PM

Time to get back into it
 
I had started a restore on a 1969 20 a few years back. Moving, building a new home and life has put the boat under wraps for the past few years and i would like to get working on it this winter. She is currently buttoned up and ready for body work, minus a few areas I need to glass where I ground out cracks. What should I be burying my floor,patches, gunnels with? Fairing? How thick of a layer is needed? Do I need to Hi build (prime) the areas before fairing? Or can I fair then hi build? I have no experience with this and need some direction.

Thanks Lenny

Lenny 09-26-2010 06:37 PM

Re: Time to get back into it
 
Ok here is what she looks like

http://i1027.photobucket.com/albums/...f?t=1285536958

http://i1027.photobucket.com/albums/...sh20/SC2-1.gif


workinpr0gress 09-26-2010 07:05 PM

Re: Time to get back into it
 
Nice, looks like you have a lot of progress made. All in due time.

Lenny 09-26-2010 08:26 PM

Re: Time to get back into it
 
Thanks! The bodywork will take some time something I don't want to rush. I just need to figure out what materials to use and how to go about it. I wish I could get the pictures to come up rather than the link I followed the directios :rolleyes:

Ryan 09-27-2010 01:32 AM

Re: Time to get back into it
 
That could be the sweetest boat in your marina next summer with a little sweat and a lot of $$$! Good luck your off to a good start.

Islandtrader 09-27-2010 10:38 AM

Re: Time to get back into it
 
Here you go...


http://i1027.photobucket.com/albums/...ish20/SC-1.gif

Lenny 09-27-2010 06:02 PM

Re: Time to get back into it
 
Thanks for the picture help I have no idea what I did wrong. Could use some advice on what materials to use for burying my floor and gunnel.


All times are GMT -4. The time now is 06:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft