Suggestions for seastar helm?
 

Getting boat ready for splash! Yeah!

Chasing steering issues. I have replaced the seals on the ram to find out ram was shot. Then replaced ram & have now discovered helm is bad. I see they sell gasket/seal kits, is this something the average Ryan can do? I also see that one of my lines under the helm has a little swelling, so I've got a buddy that can make me (free) new lines vs. buying premade/premeasured from teleflex.

Thanks in advance! :D

Re: Suggestions for seastar helm?
 

No one done this before?

Re: Suggestions for seastar helm?
 

I also have seen the kits but did not have to do mine although I did have to replace the hoses. I bought the pre cut from the factory ones but FREE is good tell you friend you will make it up to him on some free fishing trips.



FellowShip

………………………….

Just for the Grins :D

Official 23’ SF Antique Classic SeaCraft Owner

Re: Suggestions for seastar helm?
 

I tried to rebuild the helm unit one time with no luck.
Without a test bench it is (in my opinion) impossible.
There are a multitude of springs, seals and adjustments
inside the unit.
Ended up sending to a repair facility in Jacksonville, FL.
for about $200, live and learn!

The ram seals are a cake walk compared to the helm.
See ya, Ken

Re: Suggestions for seastar helm?
 

Thanks guys! I'm kinda leaning toward replacement. Think I found a tilt helm on CL for 2 bills!

As far as taking care of my buddy, I gave him some of this one last month.

[image]http://www.sailfishforums.com/forum/forums/get-attachment.asp?action=view&attachmentid=6083[/image]

Re: Suggestions for seastar helm?
 

you can take the unit into Hydraulic supply there should be one down by you and have it rebuilt. i know the one in rivera beach dose rebuild them.