Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   For Sale (http://www.classicseacraft.com/community/forumdisplay.php?f=7)
-   -   1979 23 SF SeaCraft- Potter hull w/trailer (http://www.classicseacraft.com/community/showthread.php?t=22419)

Snookerd 02-20-2011 02:17 PM

1979 23 SF SeaCraft- Potter hull w/trailer
 
$25 fee paid:
1979 Super Fisherman- rare Potter hull
1996 twin 225hp Mercury carbed engines on bracket
2002 powerheads- good compression
Rolls aluminum trailer- double axle
Twin 52 gallon saddle tanks under rear deck
Twin 50 gallon tanks under console
202 gallon fuel capacity
Original arched transom cap
(1 of a handful of 23's that were originally setup for a Volvo diesel and a jackshafted outdrive)
$5500
http://i10.photobucket.com/albums/a1...kerd/canal.jpg
http://i10.photobucket.com/albums/a1...d/S8001433.jpg
http://i10.photobucket.com/albums/a1...d/S8001437.jpg
http://i10.photobucket.com/albums/a1...d/101_5497.jpg

Islandtrader 02-20-2011 07:05 PM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
What's up Danny :D

Snookerd 02-21-2011 12:42 AM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
Hey Terry I'm just downsizing while building my Financial Advising Business on Anna Maria Island. I hate to let her go, but I don't have time to do all the things I wanted to do on her. I plan on looking into a 18 or 20 like I used to have to keep it simple for the next year or 2.

duckduckgoose 02-21-2011 06:21 PM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
I am supposed to pick up a 23' this weekend and this listing makes me think I am overpaying. $5500? Wow

timothy11 02-21-2011 08:39 PM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
When was the bracket put on and has the transom been done or is it the original.

Snookerd 02-21-2011 10:11 PM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
Quote:

I am overpaying. $5500? Wow

Your not over paying, more than likely.

Quote:

When was the bracket put on and has the transom been done or is it the original

The bracket has been on for around 8 years. The transom is original. It only had an outdrive and NOT an outboard putting pressure on the transom from 79 to 2002. When the hole was filled in the transom there were no knees glassed in. The transom is due for a rebuild. The steering arms need replacing - heavy labor job. I have some interested parties, but no one has put down the deposit as of tonight.......

Ryan 02-22-2011 12:54 AM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
duck youre not overpaying, you never see 23ccs at these prices unless they are mostly apart. If youre talking about the 23 in Wilmington that looks like a nice deal

Bigshrimpin 02-22-2011 02:20 AM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
Quote:

I am supposed to pick up a 23' this weekend and this listing makes me think I am overpaying. $5500? Wow

I seriously though this was a misprint . . . 15,500 You will never see a deal like this again on a 23. In the 10 years I have been following seacraft's I have never seen a 23CC with power priced this low.

Snookerd 02-22-2011 10:42 AM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
Quote:

duck youre not overpaying, you never see 23ccs at these prices unless they are mostly apart. If youre talking about the 23 in Wilmington that looks like a nice deal

Ryan is correct, the boat needs work. "Mostly apart" usually does apply. This boat is not apart, but it does need a transom and steering arms to start. This is a great 23SF that only 5 or 6 boats were built like. Look it up. If you are new to this site, you may need to read some old posts so that you are not blindly going into buying a SC that is 32 years old and needs work. There has been more than 1 guy on this site that thought he was buying a 2005 Tracker SeaCraft when he bought his low cost classic :o :o :D :D

Snookerd 02-22-2011 11:30 AM

Re: 1979 23 SF SeaCraft- Potter hull w/trailer
 
Deposit has been recieved on the boat from out of state.


All times are GMT -4. The time now is 05:31 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft