My 20ft Potter SF....
 

Previously put a couple of pics in the photo page but figured I would move it over here. I am pretty much neck deep with new foam core stringer, random repairs, and the new floor soon to be installed.
The boat was a nightmare after cutting into her with 3 floors stacked on top of one another and some other significant damage. I am going to make a template of the cap, cut down the shearline instead of rebuilding it, and trash the cap!
I believe she will be an open floor plan all the way through since I am working with a clean slate...no forward deck.
Everything new will be foam...no wood.
The guys working on her found an unopend bag of Lay's original, expiration 1984 under the floor!
An estimated 600+ pounds of wet wood and foam have been removed...hard to believe she ran over 40 kts with all that crap in the belly!
As i pull together some NEW pics I will post em up.
As I said before, I am not doing the work myself. The work is being done in Charleston.

Re: My 20ft Potter SF....
 

Sounds nice. Who's doing the work??

Re: My 20ft Potter SF....
 

High & Dry...

Re: My 20ft Potter SF....
 

Here are a few pics....the transom is in, the new floor height is set, and the floor will go in real soon!
For some reason I have never been able to load pics to the site...don't really know why cause no issues on any other!
Anyway, link to transom, stringers, and new switch panel by newwiremarine.com pics....NO WOOD!
http://s648.photobucket.com/albums/u...ue71/SeaCraft/

http://i648.photobucket.com/albums/u...t/IMAG0384.jpg
http://i648.photobucket.com/albums/u...t/IMAG0383.jpg
http://i648.photobucket.com/albums/u...t/IMAG0382.jpg
http://i648.photobucket.com/albums/u...t/IMAG0381.jpg

Re: My 20ft Potter SF....
 

Just click the .img code in the box by each picture on Photobucket then right click to paste on this page. Looking good. I like the switch panel.

Re: My 20ft Potter SF....
 

Here you go...

http://i648.photobucket.com/albums/u...2s_CF_plug.jpg

Re: My 20ft Potter SF....
 

Nice jig you fellas built for the hull! You guys mean business. The foam looks neat and pretty and it last a long time....but wood is not the devil :D

strick

Re: My 20ft Potter SF....
 

You woulda thought it had you seen the junk that came out of her!
Being in the wood business myself, I would agree :cool:!

Re: My 20ft Potter SF....
 

Here is the new leaning post from Nautical Designs....same as the pic minus the rocket launchers on the backrest. Has a 40 gallon oval under the lid!
http://i648.photobucket.com/albums/u...eaningpost.jpg

Re: My 20ft Potter SF....
 

http://i648.photobucket.com/albums/u...t/IMAG0729.jpg

http://i648.photobucket.com/albums/u...t/IMAG0726.jpg