Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   20ft scuppers (http://www.classicseacraft.com/community/showthread.php?t=23073)

Wildman 08-17-2011 12:48 PM

20ft scuppers
 
I have seen a picture somewhere of a guy who crossed his scupper tubes, exiting them out the back of the hull. I am wondering if this is possible without raising the floor? Without cutting the deck up?
Anybody got a link?

Mikem8560 08-19-2011 04:14 PM

Re: 20ft scuppers
 
EI'VE got a 82 the s uppers exit the transome with a tube run from the cockpit to the transome I've nit had the boat in the water
don't know if it a problem how would they be run otherwise?
http://i782.photobucket.com/albums/y...t/c6b90b4f.jpg

gofastsandman 08-19-2011 07:15 PM

Re: 20ft scuppers
 
Run the starboard deck drain to port scupper and vice versa.
The genius of Mr. Moesly.

When standing in the starboard corner, the incoming water has to go uphill to the port deck drain to ingress. Not so easy going uphill. Simple and brilliant. Ping pong scuppers help lots as well.

Cheers,
GFS

Wildman 08-19-2011 09:31 PM

Re: 20ft scuppers
 
Is there enough 'pitch' to run them out the back of the transom from deck level? Will they be below the waterline?

OilFieldMan 08-19-2011 10:29 PM

Re: 20ft scuppers
 
Ping pong scupper? I understand the ball plugging the drain when the water pushes it up. Simplest version of a check valve. Sounds like this is the least work for the scuppers at the water line problem. Anyone have a link to buy them?

joshz 08-19-2011 10:35 PM

Re: 20ft scuppers
 
raybud

Wildman 08-19-2011 10:36 PM

Re: 20ft scuppers
 
They will only work if the ball is OUT of the water the majority of the time. If there isnt enough pitch from under the deck out to the transom (or if it ends up below the water line) than its not even worth doing.

http://www.rabud.com/SCUPPER-FLYER-small.pdf

gofastsandman 08-19-2011 11:43 PM

Re: 20ft scuppers
 
Light motors and dedicated pumps keep them dry.

My Slacker has factory mods from some who came before me and were smarter than I. Merritt boys? Don`t know.

Weights and measures are key here. Think light and CG.

Cheers,
GFS

OilFieldMan 08-20-2011 09:29 AM

Re: 20ft scuppers
 
the ball style do not work as I imagined, time for some waterline measurements and a chalk line I suppose

Mikem8560 08-20-2011 01:59 PM

Re: 20ft scuppers
 
Could there be a problem with my set up? I havnt had the boat in the water yet. Perhas the crises hoses is a petter idea.


All times are GMT -4. The time now is 03:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft