Classic SeaCraft Community - non seacraft deck

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - non seacraft deck (http://www.classicseacraft.com/community/showthread.php?t=23699)

gregorymacc

03-09-2012 09:40 PM

non seacraft deck

I have a non mako project. I am replacing the forward deck on my 1993 27' Ocean Master. I have got most of the wet wood out. There was no rot in the deck. http://im1.shutterfly.com/media/47a2...D550/ry%3D400/. I cut the top skin off and plan on reusing and then painting the old nonskid wit kiwi grip. I have left about a 2" lip where the sides radius into the deck. I am going to grind this down then use 6oz tape to tab the deck in. http://im1.shutterfly.com/media/47a2...D550/ry%3D400/ Is there any tool or suggestion to get the remaining wood from the deck? I plan on using divinycell H-60 for the deck. I am using vinylester resin for this project. on a side note how do I post pictures?

fdheld34

03-12-2012 12:24 PM

2 Attachment(s)

here you go..just save pics to desktop and then go down to manage attachments/browse/upload

Blue_Heron

03-12-2012 05:25 PM

From mrobertson's thread in this forum:

Quote:

Originally Posted by mrobertson (Post 198941)

...Here's a tip if you ever do a floor the way i'm doing this one. Go to harbor freight and spend $15 and pick up one of these :

https://lh6.googleusercontent.com/-Q...0/100_0232.JPG

I chiseled out the wood in the boat by hand the old fashioned way, with a hammer and chisel. I had enough of hitting myself in the hand with the hammer so after some research i came up with the air chisel. I still had to remove the wood from the top skins i cut up out of the boat and it worked like a dream. Quick and easy :

https://lh5.googleusercontent.com/-X...0/100_0231.JPG

-Mike

gregorymacc

03-17-2012 07:53 AM

Few more updates of the work I have been doing. The entire forward deck is up and out. and I have ground down the topside skin. I am going to recore with divinycell h-60 then lay the old glass back on top.

http://i1059.photobucket.com/albums/...camera2281.jpg

http://i1059.photobucket.com/albums/...camera2279.jpg

I plan on tabbing the deck back in with a couple layers of 6oz tape. I only have about a 2" lip to work with then the deck transitions to the inside radius up the sides.

http://i1059.photobucket.com/albums/...camera2276.jpg

All times are GMT -4. The time now is 03:45 AM.