classic SS SC emblems
 

Regarding the SS seacraft emblems on the mosely site, are you guys using the x-large or the the standard size?? Also are you drilling it right into the hull, and if so what are you using on the screws? 5200?

I used the standard size, mounted to a piece of varnished mahogany with short wood screws, because I felt that provided more contrast to highlight the emblem than just mounting it on the white hull. http://i188.photobucket.com/albums/z...ipics006-1.jpg I used No. 10 machine screws to mount the wood to the boat, via drilled and tapped holes in the fiberglass. I always mount stuff to fiberglass this way if I'm not thru-bolting it, because the machine screws stay tight; DON'T use sheet metal screws . . . the sharp edges on the threads act like knives and will eventually cause the screws to loosen up! No sealant or 5200 is required.

bushwacker are you doing like I've done and used heli coils when tapping into fiberglass