help needed 23' guys
 

i need someone te help me out and measure the distance between the 2 notches closest to the keel i am compleatly redoing my trailer and i think the bunks are too close.

Thanks for your help guys!

any help guys much appreciated?

I have a float on trailer. My 23' sits on a lift so I cannot walk on out and take a measurement.
I can tell you that the bunks are set so they are under the stringers and placed just inside of the chines. 55 1/2" apart.

http://img.photobucket.com/albums/v1...trailer2-2.jpg

A contoured guide between the bunks that the keel sits in, keeps the hull centered.

http://img.photobucket.com/albums/v1...k/P8160039.jpg

The forward suport bunks are the only ones that are near the keel.

http://img.photobucket.com/albums/v1...k/P8160041.jpg

Mine are very similar

http://img.photobucket.com/albums/v6...1/DSC_0695.jpg

Thanks guys but I need the measurements. Because as of now I think the bunks are too close and the nut heads are going to take long gashes out of the vertical part of the hull if I go in not centered or at an angle.

Is there anyway I can save money and make my own PVC guides?

Thanks

this is the mesurement i need.

About 30"

thanks!