Mercury Blackmax oil injection
 

What is the best way and what parts are needed to bypass the oil injection on an 88' 135hp blackmax,I want to run this engine as a premix.The simpler the better.If anyone can use the components and oil tank after I remove them they are welcome to them.

Oil injection block off kit . . . Merc part number is 43453
and you need a brass plug for the pulse side of the hose.

yank the oil injection warning module . . . and I would suggest removing the spark advance module while your at it. Set timing to book.

thats how my 200xri is set up. i hate the smoke at idle but at least i know im good to go.