Boat lift
 

Hi guys and gals .. Ineed some insight on where you all have your bunks set at on the lift.. I obviously ahave a cradle lift.. Did away of the straps cause of the damage to the flare on hull.. I just need some insight as to what the width of bunks ,inside dim. And length of bunks.. I have two 2x10s laminated with 1/2 ply in the middle. So 3.5 " thick by ten feet beams are 8'-8" from front to back... Thanks in advance... Oh yea 23'sf

Anybody out there?????

I can measure mine tomorow. I se then the same as my trailor bunks were ive got 2 2x12
12' long my i beams
Are 14' long and the cradel is 11 1/2' wide

Is the. Beam and stringer width different on the 20 to the 23?