Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   engine bracket (http://www.classicseacraft.com/community/showthread.php?t=26265)

dginge 03-09-2014 10:18 AM

engine bracket
 
How often do you,guys reseal engine bracket bolts?
I,have water coming in. Half gallon an hour maybe? It's the only place that I,feel,it can be coming in. Not coming in from,bottom, fish box, or plug. It's
About the only place I can,think of. Is this common? My splash well
Is usually,closed off with,plugs in tubes so,it shouldn't come in
There. .I may have a guy pick engine up and reaseal. And yes
My transome is already wet. I've drilled holes.. and they
Were wet..... Perhaps the water intrusion is from the bracket ?

aldo 03-09-2014 12:29 PM

Check your brass scupper tubes if you have them. If the flare is gone on the bottom that could be the answer to your water issue.


All times are GMT -4. The time now is 01:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft