Free fiberglass parts
 

If anyone wants any of the fiberglass parts cutout from my 18SF project, they are welcome to have them.
I have the boxes from the rear corners, underdeck livewell, front fish box and raised bow platform, fuel tank tub and deck panel.
Also have the fuel tank, 60x24x8"; has some corrosion and three small holes on top- free.

Probably will get rid of console too and missc. hatches.

Have a good condition 14" Wema sender $20.
Yamaha dual engine fuse guage harness pn 6Y5-83553-NO-00 $15.
Yamaha dual engine wire harness assembly pn 704-82509-10-00 $65.

If anybody has, I need the main aluminum bow for a Bimini top- it measures 84"wide x 72" tall, 7/8" diameter.

I want the transom boxes please! Oh and the starboard transom hatch please.

Yipee. Goin fishin. Happy Pops day everyone.

Oh, I`m off to see the wizard...

GFS

Gfs, the boxes are yours.
I have the starboard hatches for the cutouts in the boxes but no hatch for the splashwell, if that's what you're talking about.

I do have a starboard piece to raise up the transom cutout.
I think the previous owner used it as a splash guard along with a motor bracket.

I have the teak splashwell gate. I worded this poorly. Turn off your decoder rings. I can hear y`all laughing now.

I was looking for the right side transom box lid/hatch.

I might want the forward fish box for the other boat. Please. That thing has no storage.

Cheers,
Us

The tops of the transom boxes are glassed in, so no lid/hatches.
I'm guessing the two square black starboard hatches I have are for the vertical bulkhead cutouts.
If you need pics let me know.

Im looking for the vertical left rear hatch and the forward anchor locker if they fit on a 20MA

I'm 2nd in line

Pics would be nice

I think the 18 has only the one hatch up front on the raised deck box; it's 27" wide and 24" long; same size as the rear fish box hatch.
Hard to tell on this boat, since a lot was already cut out.

The MA has one hatch also but don't know if they're the same size.

If Gfs doesn't want the vertical hatches, you can have them.

I looked at the pics of a few 18's and it won't fit, but thanks

Transom boxes- two sections and vertical hatches.

Front raised box with fishbox/liner.