Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   Insulated forward fish box. (http://www.classicseacraft.com/community/showthread.php?t=27174)

Jeff79Sceptre 04-16-2015 02:55 PM

Insulated forward fish box.
 
1 Attachment(s)
I cut out the original. 2 inches of foam on outsides. Drains into bilge for now. Coosa bluewater 26.Attachment 10005

kmoose 04-16-2015 07:48 PM

Careful about adding extra weight up there as the Sceptors don't don't like a lot of extra up front. But then again I myself add quite a bit.

Jeff79Sceptre 04-16-2015 09:24 PM

Moose, I'm running twins so the added weight is really just to help offset the weight. Original was rotten. I'm dropping her off next week for twin 2015 etec 150's. I'm excited to see how much the water line will change after the new transom.

kmoose 04-17-2015 01:14 PM

Sounds good, I wasn't quite sure if you had a full bracket or not. What are you going with?

Jeff79Sceptre 04-18-2015 05:35 AM

28" setback
 
1 Attachment(s)
I used regulators idea for the rigging tubes. Really going to clean up the transom

kmoose 04-19-2015 06:36 PM

nice!


All times are GMT -4. The time now is 05:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft