![]() |
Sale on composite boards/panels (transom foam) - limited time
For a very limited time, we will offer our foam core and honeycomb panels - 25% off
26 lb 3/4" transom foam core: A heavy duty foam, reinforced with woven roving, used primarily in transoms. 3/4" can be epoxy glued together to make a thicker core. 15lb 1/2" foam core: A lighter foam, with fiberglass reinforcement, great for decks/sole/frames/stringers/etc http://www.gulfstreamcomposites.com/category-s/136.htm https://lh3.googleusercontent.com/1v...s=w169-h200-no 1" finished honeycomb fiberglass panels: These panels have a very nice finished surface, 18 oz glass on each side https://lh3.googleusercontent.com/zy...g=w518-h440-no |
Received a new shipment of the foam panels, we had run out and there were a few people asking when they would be back in stock.
|
I would like to move this transom foam to make room for more inventory,
$250/sheet for the transom board $225 for the 25mm pre-glassed honeycomb panels email or PM me with any questions joel@gulfstreamcomposites.com |
Are these 4x8 sheets of honey comb
|
Quote:
On another note, we will soon be producing our own panels. The stock ones will be T92 Airex with 1708 skins set in vinyl-ester, far superior to the normal honeycomb panels. Dont have a cost set for them yet, need to get the first batch made for my boat first :D |
I need a panel made 30.5x52.75. What can you do?
|
Hi Travis,
I should be able to post the panel prices next week. Unfortunately, they will have to be full sheet panels though (4x8) Joel |
All times are GMT -4. The time now is 10:24 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft